raspberry pi magic mirror istilation issue

#RASPBERRY PI MAGIC MIRROR ISTILATION ISSUE UPDATE#

Use the black jumper cable to go from the GND pin on the control board to the GND pin on the Pi ( Pin 6). You can now wrap the ribbon cable from the control board over and attach it to the matching connector on the Raspberry Pi. Use the screws to mount the Raspberry Pi on top of the standoffs. Attach the loose ribbon cable to to the connector on the side of the control board. Be sure to be gentle with the ribbon cables as you flip it over.

You can now use the provided standoffs to mount the display board to the back of the touchscreen. Flip the control board over and connect the much smaller ribbon cable coming off the touchscreen to the connector on the front of the board by first pullout out the clamp inserting the cable and wpressing the clamp back in place to hold. You will need to gently pull out the clamp before inserting the ribbon cable, once you are sure it seated correctly gently but firmly press the clamp back in place. Once your SD card is ready insert it into the Pi and you are ready to set up the hardware.Īttach the wide ribbon cable on the touchscreen to the connector on the underside of the display board. I also like balenaEtcher ( ) for flashing SD card images. Once you are satisfied with the settings you can burn the image to the SD card right from PiBakery.

#RASPBERRY PI MAGIC MIRROR ISTILATION ISSUE UPDATE#

This is great for getting basic system settings like WiFi, software update and region settings up and running automatically. PiBakery uses a blocks-based interface to script the initial boot (and potentially every boot). To set up the Pi SD card image you can use the PiBakery application ( ). I used Raspbian Stretch with desktop (but without the recommended software which we won’t need.) Magic Mirror runs on the standard installation of Raspian Stretch, that includes the Pixel Desktop GUI. With a little JavaScript knowledge you can even write your own modules. MagicMirror comes with a set of built in modules for things like the weather, calendars and news but also has a large community of third party modules for things like tracking your commute, integration with smart home devices like Amazon Alexa. Both the data and look are customizable with standard web technologies like Javascript and CSS. MagicMirror is information dashboard app written in Node.js that runs on a Raspberry Pi. To build this project we will use Magic Mirror an open source application from Michael Teeuw. When lit you can see right through the mirror making white text on a black background appear to float on the mirror surface.

When the monitor is off or black it looks like a mirror. To add the Magic part to this project we place the touchscreen display behind a two way mirror. This project using a Raspberry Pi, the official Raspberry Pi touch screen and a few other materials, can be completed in a weekend but provides plenty of room to grow and customize. Get the weather, news and even commute time all while combing your hair. Looking for a way to enhance your morning routine? Maybe an electronic dashboard is what you need.

Raspberry pi magic mirror istilation issue